Get Post Falls Backflow Assembly Test Report Form - City Of Post Falls - Postfallsidaho

Completing the Post Falls backflow assembly test report form is essential for ensuring compliance with water safety standards. This guide provides clear instructions for filling out the form accurately and efficiently online.

Follow the steps to fill out the form online.

1. Click ‘Get Form’ button to access the Post Falls backflow assembly test report form and open it in the editor.
2. Begin by filling in the customer name and date in the provided fields.
3. Enter the street address and location of the assembly in the designated sections.
4. Identify the make, model, and serial number of the assembly, as well as its size, and select the appropriate type from RPBA/RPDA or DCVA/DCDA.
5. Indicate whether the assembly is a horizontal set by checking 'Yes' or 'No'.
6. Complete the initial test section—report pressure readings for check valves, relief valve, and line pressure as applicable.
7. In the shut off valves section, indicate whether valves #1 and #2 are closed tight or leaked, and whether they have been cleaned or replaced.
8. For any repairs made, detail the particular components that were cleaned or replaced.
9. Make notes regarding the assembly's status, including whether it is replaced, existing, or newly installed, along with the serial number of any replaced assembly.
10. Fill in the tester's name, license number, gauge number, and final test results—marking whether it passed or failed.
11. Ensure the tester acknowledges the form by signing it and including their employer’s details.
12. Once completed, save changes, download, print, or share the form as required.

Start filling out your Post Falls backflow assembly test report form online today!