Get Instructions To Operate A Troxler Form

Troxler devices use nuclear density gauges to measure the moisture and density of materials like soil and asphalt. By sending radiation through the material, they assess its properties. Understanding how to operate a Troxler form effectively is crucial for accurate readings. You can find detailed instructions to operate a Troxler form on platforms like US Legal Forms.

The source rod is lowered into the ground and, once released from its shielded housing, gives off just enough radiation to measure density. The Geiger Mueller tubes detect the gamma radiation that is emitted from the radiation source and passes through the material under the gauge.

Do not ship or transport a gauge with a sliding block that is not fully closed. For example, a Troxler 3440 gauge with a TI of 0.6 must be kept at least 1 foot away from the driver or passengers. Two Troxler 3440s with a combined TI of 1.2 must be kept at least 2 feet from the driver or passengers.

Precision for a typical gauge for a one minute reading at the time of manufacture is ±0.5 pcf at backscatter and ±0.25 pcf at 6" direct transmission depth.

3:29 4:58 AASHTO T 310 - Nuclear Density Gauge - Field Testing - YouTube YouTube Start of suggested clip End of suggested clip So that the source rod will be in full contact with the soil. Press the start button to start theMoreSo that the source rod will be in full contact with the soil. Press the start button to start the test.

The source rod is lowered into the ground and, once released from its shielded housing, gives off just enough radiation to measure density. The Geiger Mueller tubes detect the gamma radiation that is emitted from the radiation source and passes through the material under the gauge.

0:36 2:20 AASHTO T 310 - Nuclear Density Gauge - Standard Count - YouTube YouTube Start of suggested clip End of suggested clip Position start a standard count by pressing the standard or STD. Button on the gauge. The gauge willMorePosition start a standard count by pressing the standard or STD. Button on the gauge. The gauge will ask if you wish to take a new standard count press the yes button to continue.

NUCLEAR GAUGE - THEORY OF OPERATIONS The tip of the source rod contains a small radioactive source (Cesium–137) which emits gamma rays. Detectors in the base of the gauge measure this radiation and calculate the density of the material.