Get Trek Sensor 2 Button Manual

This guide will provide you with detailed, step-by-step instructions on how to fill out the Trek Sensor 2 Button Manual online. By following these instructions, you can ensure that you properly set up your Trek Cycling Computer for optimal performance.

Follow the steps to accurately complete the Trek Sensor 2 Button Manual online.

1. Click the ‘Get Form’ button to access the Trek Sensor 2 Button Manual and open it in the online editor.
2. Begin by reading through the introduction section to familiarize yourself with the product. Make sure to note any important information regarding the setup and installation.
3. Locate the 'Precautions' section. It is critical to understand these safety reminders before operating your cycling computer.
4. Identify the components listed in the 'Main Unit/Accessories' section. Check that you have all the necessary parts as outlined.
5. Proceed to measure the wheel circumference, using the guidelines provided in the ‘Setting the wheel circumference’ section. Ensure that you record the correct measurement needed for the setup.
6. Go to the 'Installing/Replacing the battery' section and follow the instructions to correctly install or replace the battery for the cycling computer.
7. Continue to the 'Setting Speed Scale' where you will choose between kilometers or miles. Make sure to confirm your selection as instructed.
8. Follow the steps under the 'Dual Odometer' section to set your odometer for tracking distances accurately for two bicycles, if applicable.
9. If needed, set the clock time by following the provided instructions to choose between 12-hour and 24-hour formats.
10. Remember to test the cycling computer's functionality by following the 'Test' instructions before finalizing the installation.
11. Finally, save your changes, download or print the completed manual for your records, and ensure you can refer to it when needed.

Begin filling out the Trek Sensor 2 Button Manual online today for an efficient setup.