Store Fax Text For Free

If the memory is full, try sending a monochrome fax using the Direct Send feature or sending your faxes in smaller batches. If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax.

Sending a Stored Fax Enter the fax number using the buttons on the control panel. Select the Enter a Fax Number area on the LCD screen, and use the numeric keypad on the screen to enter the fax number. ... Select Contacts, select one or more recipients from the list, and select Proceed.

Follow the steps below to print the faxes you have received: Press. (Settings). ... Press All Settings. Press the Up or Down arrow key to display Fax. Press Fax. Press the Up or Down arrow key to Print Fax or Print Document. Press Print Fax or Print Document. Press Yes or OK. Press. (Home).

This is a precautionary feature that ensures you will not lose your messages in the event of a power failure. Your machine's display will indicate when you have a fax stored in memory. If you would like to preview your faxes before you print them, please refer to: Fax Preview.

How do I delete the received faxes that are stored in my Brother machine's memory? Press MENU/SET, 2 (Fax), 5 (Remote Fax Opt), 1 (Fwd/Page/Store). Press the UP OR DOWN ARROW key to select Off. Press the MENU/SET key. Press 1. Press the STOP/EXIT key.

Reference: Make sure that the machine is turned on. Press the FAX button. ... Press the left FunctiON button. ... Select Memory reference, then press the OK button. Use the button to select Delete all documents in memory, then press the OK button. ... Use the button to select Yes, then press the OK button.

Cancel a receiving (incoming) fax Unplug your machine from the electrical outlet. Disconnect the telephone cord from the machine's LINE jack. Leave the power cord unplugged for about 15 seconds. Plug the machine back in. ... Unplug your machine from the electrical outlet again. Press and hold Stop or Stop/Exit.

Use the Fax Storage feature to store incoming faxes in the machine's memory. Retrieve your stored fax messages from your fax machine when you are at another location using the Remote Retrieval commands. Your machine will print a backup copy of each stored fax.