Protect Break Permit For Free

This permit applies to all situations where pipe-work requires opening up and where hazardous contents may leak or where residual deposits may be present.

Treat all lines as if they are under pressure. Break flanges "down and away" (out of the line of fire). The initial break should be made over containment whenever possible. Be prepared to re-tighten bolts if the line is not clear.

Spool removal or air gapping isolation Spool removal or air gapping is a line-breaking method that involves removing a spool section from the piping and installing a blind flange to block the flow from the source.

Overview. First Break is First break is the act of breaking the integrity of process piping or equipment that may contain toxic or hazardous products. It is a planned loss of containment where there is potential for trapped pressure, or exposure to a toxic commodity or unknown material.

5.14 Before issuing a permit, equipment is to be inspected to ensure that the equipment/ facility is prepared for safe execution of the assigned work, the area is cleaned and all safety precautions have been adopted.

Line breaking means the intentional opening of a pipe, line, or duct that is or has been carrying flammable, corrosive, or toxic material, an inert gas, or any fluid at a volume, pressure, or temperature capable of causing injury.

Line breaking is the intentional opening of a pipe, line, or duct that contains or has contained material capable of causing injury. OSHA requires that all members of a line breaking team understand the hazards related to the material and equipment involved.