Location Columns Diploma For Free

§ Orient the column so that the depth of the column is contained in the major plane of bending or is perpendicular to the major axis of bending. This is provided to increase moment of inertia and hence greater moment resisting capacity.

Columns should ideally be placed at (or close to) a building's corners and where beams and walls meet. Most of the time, beams are put under the walls of heavy, concentrated loads so that these loads don't go directly on slabs.

But, ing to Vastu you need an even number of columns so add one more column so, the required number of columns becomes 16. Thus you will need approx 16 nos pillars to build a 1000 sq ft house.

You can orient the column in any direction as an equal moment will be created. But to satisfy the directional ratio of (condition-1), the major axis of the column should be kept in the y-direction.

As a general rule, columns should be placed nearby the corners of the building, and at the points where beams and walls come together. Select the location of columns so that beams don't bend. Avoid beams that are too long. Avoid columns with a lot of space between them in the middle.

Depth of column should be perpendicular to the major axis. Columns must be located at the junction of beam/walls. Columns must be located at corners such that biaxial moments must be balanced and centre line of wall must coincide with centre of column.

How to decide the position and orientation of Columns? | Civil Tutor YouTube Start of suggested clip End of suggested clip But a minimum column depth of 200 mm should always be maintained as per is code large center toMoreBut a minimum column depth of 200 mm should always be maintained as per is code large center to center distances between columns should be avoided in order to eliminate the need for a wider cross