Fit Bates Bulletin For Free

How do I know what size gullet my saddle has? All new saddles are fitted with a medium gullet (black) at point of manufacture. If your gullet has been changed after purchase the colours are sized as follows: Yellow ? Narrow, Green ? Medium Narrow, Black ? Medium, Blue ? Medium wide, Red ? Wide, and White is Extra wide.

Once you have the correct bar, you will need to remove the current bar from the saddle: Step One: Undo the bolts at the front of each panel.Step Two: Slide each panel off the point of the tree. Step Three: Fold back the flap covering the gullet bar.Step Four: Undo the bolts holding the gullet bar in place.

How to change your Kent and Masters Saddle Gullet Bar! - YouTube YouTube Start of suggested clip End of suggested clip And again if you look here closely it does actually show you this side um that there is a slightMoreAnd again if you look here closely it does actually show you this side um that there is a slight slant. There. So that's the way you're going to need to put the bar into the saddle. So pop your bar.

~ You can easily change the width of the gullet in your saddle at home from a Narrow to Extra wide in just a few simple steps - no need for a saddler! ~ This is very beneficial for young horses who are constantly growing as well as horses who often have seasonal weight changes or muscle development.

HOW TO Change your Bates / Wintec / Arena Saddle Gullet Bar - YouTube YouTube Start of suggested clip End of suggested clip So i've just got a normal phillips screwdriver. Here. So just undoing these first. And then you canMoreSo i've just got a normal phillips screwdriver. Here. So just undoing these first. And then you can undo the screws that are in the bar in the.

Remove the screw at the end of the gullet plate and repeat on the other side. Take the gullet plate out of the saddle. Using your hands, apply pressure to stretch the tree in the direction you will be changing the gullet ? wider or narrower for 30 seconds. Wherever possible use new screws from your gullet kit.

Undo the velcro along the length of the panel. Insert the needed shims into the panel, ensuring that the logo faces towards the tree of the saddle. Make sure that the shims are aligned with the straight edge along the edge of the chamber. Fasten the velcro, making sure it is smooth all the way along the panel.

Once you have the correct bar, you will need to remove the current bar from the saddle: Step One: Undo the bolts at the front of each panel.Step Two: Slide each panel off the point of the tree. Step Three: Fold back the flap covering the gullet bar.Step Four: Undo the bolts holding the gullet bar in place.

It's recommended by the Society of Master Saddlers (SMS) that saddles should be checked at least twice a year. However, some horses change shape more often, due to fitness, condition and age and would obviously require more regular visits.

How to use the Easy-Change Gullet gauge - Bates, Wintec ArenaYouTube Start of suggested clip End of suggested clip So find it at the top there and pop your fingers on you want to find three fingers behind theMoreSo find it at the top there and pop your fingers on you want to find three fingers behind the scapula. Once you found that point and make sure your horse is standing square.