Finish Radio Attestation For Free

Any type of electronic device that is manufactured, sold or distributed in the US requires approval from the FCC. To receive this coveted seal of approval, your product must pass FCC testing and stay within the radio frequency limits imposed by the Federal Communications Commission.

Obtaining FCC certification is straightforward if you are careful and take it step by step. Step 1: Select Radio Frequency and Design Equipment.Step 2: Test During Development.Step 3: Register with FCC.Step 4: Select Test Lab.Step 5: Compliance Test.Step 6: Certification & Filing.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation.

A Part 15 device is anything that falls under the regulations within 47 CFR § 15.5. These are unlicensed electronics, which need to adhere to regulations to avoid the risk of interfering with other devices.

In general, FCC certification is required for any electronic device that can oscillate above 9 kHz. Manufacturers must make sure that their products will neither interfere with other products nor cause risk and harm to the public.

About FCC Part 15 Regulation FCC Part 15 is a federal regulation that sets limitations on the amount of electromagnetic interference allowed from digital and electronic devices such as wristwatches, musical instruments, computers, telephones, and low power transmitters.

INTENTIONAL RADIATORS (Part 15, Subparts C through F and H) Examples include: wireless garage door openers, wireless microphones, RF universal remote control devices, cordless telephones, wireless alarm systems, Wi-Fi transmitters, and Bluetooth radio devices.

(i) Class B digital device. A digital device that is marketed for use in a residential environment notwithstanding use in commercial, business and industrial environments.

If you're designing, manufacturing, or marketing a device for the US market that communicates wirelessly ? using Bluetooth, WiFi, cellular or any other RF technology ? or that contains a processor, that device is subject to the FCC's equipment authorization rules.

The FCC ID must be on the product. It can be a label, etched in on the exterior of the product, or be capable of being electronically displayed, but it must be visible and in a font that is reasonably visible without magnification.