Feature Line Deed For Free

Click Modify tab Edit Geometry panel Join Find. Select the feature line you want to join other lines to. Select the joining object or enter Multiple to make a selection of multiple feature lines, polylines, or 3D polylines.

So this is the edge of the gutter, the flow line, the top face, and the top back. So that's what Feature Lines do, they represent edges or linear objects in a three dimensional form in your drawing model.

Draws a three-dimensional polyline with straight segments. Although the 3D Polyline command does not have as many options as the Polyline command, you can apply editing changes, such as splining, with the Edit Polyline command after the three-dimensional polyline is drawn.

Creating Feature Lines in Civil 3D - YouTube YouTube Start of suggested clip End of suggested clip Select the feature line drop down. And select create feature lines from objects. Our command line isMoreSelect the feature line drop down. And select create feature lines from objects. Our command line is asking us to select the line. So we'll select this one and this one go ahead and press enter.

The only way 3D polylines can pull that off is to segment the curve and turn it into lots of little straight lines. Feature Lines don't have that restriction. Another thing that's cool about Feature Lines is that they interact with each other.

Creating Feature Lines in Civil 3D - YouTube YouTube Start of suggested clip End of suggested clip Select the feature line drop down. And select create feature lines from objects. Our command line isMoreSelect the feature line drop down. And select create feature lines from objects. Our command line is asking us to select the line. So we'll select this one and this one go ahead and press enter.

Converting to a Feature line is done using the ?Create Feature Lines from Object? (AeccCreateFeatureLines) command found on the Home tab>Create Design panel>Feature Line drop-down.

Grading: Fun with Feature Lines - YouTube YouTube Start of suggested clip End of suggested clip Let's take a look at the elevations of that feature line if we go to the editor. So the top where weMoreLet's take a look at the elevations of that feature line if we go to the editor. So the top where we started was 809. And we were grading. Down about -3 that was a natural slope there roughly.

To Create Feature Lines From Objects Click Home tab Create Design panel Feature Line drop-down Create Feature Lines From Objects Find. In the drawing, select one or more polylines, lines, or arcs. Then press Enter.In the Create Feature Lines dialog box, specify the feature line options.

Use the Break command to break a feature line into two feature lines. The prompts for this command are similar to the AutoCAD Break command. Click two points to specify both sides of the break.