Complete Fax Log For Free

Allow the computer to remain unplugged for a minimum of five minutes, ensuring that the device has sufficient time to power down completely. Allowing the device to discharge its power will also clear its memory.

Erasing All Data from the Product Press the home button, if necessary. Select Settings. Select General Settings. Select System Administration. You see the System Administration screen: Select Restore Default Settings. You see a screen like this: Select Clear All Data and Settings. Select Yes. Select Close.

Delete faxes from memory From the Home screen, touch the Setup button. Touch the Service menu. Touch the Fax Service menu. Touch the Clear Saved Faxes button.

1. This message means the Brother machine's memory capacity has been exceeded. The amount of memory used depends on the amount or type of data in the documents being faxed or copied.

Press the FAX button, then press the right function button. The memory reference screen is displayed. Use the up or down arrow to select Delete all documents in memory, then tap OK. Use the up or down arrow to select Yes, then tap OK.

From the printer tap the Setup icon, then select Fax Setup. Next select Advanced Fax Setup and set the Fax Confirmation as Off. Also ensure that Fax Error Report is set as Off.

If the memory is full, try sending a monochrome fax using the Direct Send feature or sending your faxes in smaller batches. If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax.

Follow the steps below to clear the fax log: From the Home screen on the product control panel, touch the Fax icon. Touch Setup. Touch Tools. Touch Clear Fax/Logs Memory to clear the fax log.

If the memory is full, try sending a monochrome fax using the Direct Send feature or sending your faxes in smaller batches. If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax.

The "Memory Full" message appears on the display when you have too many documents saved. Make space for new documents by deleting one or all of the documents in the memory.