Affix Number License For Free

Remove the frame for easier drilling. Using the 1/8" drill bit, drill four pilot holes in the center of each position. Finish the holes by enlarging them with the 11/32" drill bit.

Use a power drill and a 1?8 inch (0.32 cm) bit to drill shallow pilot holes into the bumper. Drill your pilot holes only about 1?8 inch (0.32 cm) deep into the bumper. If your bumper is chrome, you'll need to start your holes with a center punch before you can start drilling.

As long as you don't alter or obscure any of the text on the plate, you should be ok.

The valid Indian driving license number must satisfy the following conditions: It should be 16 characters long (including space or hyphen (-)).

An identifying number on a licence or licence plate that identifies it with the owner.

Card Size is 85.6mm x 54.02 mm +/- 2 mm and thickness of minimum 0.7 mm.

The document number one an or 10 digit alphanumeric number found either on the back stab the license or lower his hand corner depending.

How many digits are in a DL? A Driving Licence number is of 16 digits including '-' or space.

The most traditional way to attach a number plate is by screwing it to the frame of the vehicle, or alternatively using nylon nuts and bolts. You can, in theory, do this with any screw but plastic nut and bolt combinations are recommended to avoid cracking.

Steps for Lost RC:You will have to mandatorily file an FIR ( First Information Report) at the nearest police station the RC is lost.You will have to give an application to get a duplicate RC through Form number 26 which is the application for getting a duplicate RC.More items...