Adjust Fax Log For Free

The "Memory Full" message appears on the display when you have too many documents saved. Make space for new documents by deleting one or all of the documents in the memory.

If the memory is full, try sending a monochrome fax using the Direct Send feature or sending your faxes in smaller batches. If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax.

Delete faxes from memory From the Home screen, touch the Setup button. Touch the Service menu. Touch the Fax Service menu. Touch the Clear Saved Faxes button.

FAQs & Troubleshooting Press MENU or MENU/SET and choose Fax => Remote Fax Opt => Fwd/Page/Store or Forward/Store. Press the UP OR DOWN ARROW key to choose Off. Press the OK or MENU/SET key. Your Brother machine's LCD will ask you the following question: Erase All Fax (Doc) ? Yes 2. No. ... Press 1. Press the STOP/EXIT key.

From the printer tap the Setup icon, then select Fax Setup. Next select Advanced Fax Setup and set the Fax Confirmation as Off. Also ensure that Fax Error Report is set as Off.

From the Home screen, touch the Fax button. Touch the Fax Menu button. Touch the Fax Reports button. Touch the Print All Fax Reports button.

Follow the steps below to clear the fax log: From the Home screen on the product control panel, touch the Fax icon. Touch Setup. Touch Tools. Touch Clear Fax/Logs Memory to clear the fax log.

Clearing fax memory by printing a fax job Print received fax(es). Fax memory will automatically be erased.

Fax machines will automatically retry calls in case the receiving end fails to answer. It is easy to adjust the number of times the machine redials by just checking your machine.

At the end of a transmission, the sending fax machine waits for a signal from the receiving fax machine to say transfer complete. When the sending fax machine receives this signal, it prints out a fax receipt to show proof of receipt.