Get Generators And Fire Pumps

Filling out the Generators And Fire Pumps application form is a critical task for ensuring compliance with air quality regulations. This guide provides clear instructions to help users navigate the online form efficiently and accurately.

Follow the steps to complete your Generators And Fire Pumps application online.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin with section 1, where you need to provide facility identification. Specify the identity of the generator or fire pump, such as Generator #1 or Fire Pump #1.
3. In section 2, enter the manufacturer of the generator or fire pump.
4. Proceed to section 3 and input the model number associated with the equipment.
5. In section 4, indicate the type of equipment, such as compression ignition or fire pump.
6. For section 5, provide the maximum designed operating rate either in horsepower or mechanical kilowatts along with the generator efficiency.
7. In section 6, check the appropriate box(es) to indicate the primary and secondary fuels being used. Options may include natural gas, propane, or various oils.
8. Answer section 7 by indicating whether the unit is equipped with a non-settable clock by choosing yes or no.
9. Section 8 requires you to input the manufacture date of the unit. If it's dated before July 11, 2005, you will skip to section 11.
10. In section 9, confirm if the unit operates more than 100 hours per year. Answer yes or no.
11. If yes to section 9, continue to section 10. Here, if applicable, state whether crankcase emissions will be controlled if the generator operates over 500 hours annually and is manufactured after July 11, 2005.
12. In section 11, indicate whether the emergency generator or fire pump operates less than 500 hours per year.
13. Provide details in section 12 about the displacement of the unit in liters.
14. In section 13, state the number of cylinders present in the unit.
15. Section 14 requires listing the Manufacturer Guaranteed Emission Rates. Attach supporting documentation and verify the units for emissions.
16. In section 15, indicate if a stack test has been conducted and attach the most recent stack test report if applicable.
17. Complete any additional information for control equipment and stack details as specified in the remaining sections.
18. Once you have filled out all sections, you can save changes, download, print, or share the completed form.

Start completing your Generators And Fire Pumps application form online today!