Get La Century Rehabilitation Hydrocollator Temperature Log 2016-2025

A hydrocollator temperature log should include the date and time, the temperature of the water, the temperature of the hydrocollator unit, the name of the person taking the reading, and any notes or comments about the readings.

The temperature of the water should be checked with a thermometer after every adjustment, before using the HotPac . Always allow sufficient time for the water temperature to stabilize .

The Hydrocollator will be drained and cleaned every 2 weeks, as documented on the Hyrocollator Cleaning Log • Temperature readings will be recorded on a daily basis in the Hot/Cold Pack Log (see attached). Temperatures should be between 160-166 degrees Fahrenheit per the manufacturer's manual.

1:01 2:28 At that temperature. We can use a gel packs. That's about 135 almost at that temperature. We canMoreAt that temperature. We can use a gel packs. That's about 135 almost at that temperature. We can actually pick the gel packs up with our bare hands. I'm not worried about the burden.

What is wrong with the water in the Hydrocollator? If the water is not getting hot enough, the Thermostat or Heating Element may be the cause. If the water is boiling, the hydrocollator temperature may be set to high or the Thermostat needs to be replaced.

0:35 2:28 You take a thermometer. This is a little meat thermometer here this unit does it come with aMoreYou take a thermometer. This is a little meat thermometer here this unit does it come with a thermometer. And I set this one and it's a little bit over 130. At that temperature.

The Hydrocollator will be drained and cleaned every 2 weeks, as documented on the Hyrocollator Cleaning Log • Temperature readings will be recorded on a daily basis in the Hot/Cold Pack Log (see attached). Temperatures should be between 160-166 degrees Fahrenheit per the manufacturer's manual.