Get Fire Alarm Installation/revision Permit Form - University Of Houston

This guide provides clear, concise instructions on how to properly complete the Fire Alarm Installation/Revision Permit Form for the University of Houston online. Following these directions will ensure that you provide all necessary information accurately and efficiently.

Follow the steps to fill out the form correctly.

1. Click ‘Get Form’ button to access the Fire Alarm Installation/Revision Permit Form and open it in your preferred document editor.
2. Begin by filling in the UH Building Permit Number if applicable. Then, enter the company name of the organization responsible for the work.
3. Input the primary phone number for the company and include the Texas License Number as required by regulations.
4. Provide the address of the work location and specify the job supervisor's contact information, including their phone number.
5. Detail the UH project manager's name and the work request number, if available.
6. In the JOB INFORMATION section, enter the name of the building where work will be carried out along with the building number.
7. List the floors or rooms that will be affected by the fire alarm work, ensuring to note any specific areas that require attention.
8. Indicate the work hours by filling in the start date, end date, start time, and end time for the project.
9. If applicable, specify whether any after-hours work will occur and what time the job will conclude. Additionally, indicate if there will be work on the weekend and specify the days.
10. Confirm whether certified plans have been submitted to the UH Fire Marshal Office for review and approval, as these must be submitted before work can begin.
11. Provide a description of the work to be done, ensuring to include any details that will assist in project review.
12. State whether the fire alarm system will be shut down during the process and designate the name of the fire watch who will oversee safety if applicable.
13. Gather the names of all fire watches assigned to the job, ensuring they are all properly trained.
14. Ensure all required signatures are obtained, including your signature and printed name, along with approval from the designated authority.
15. Finally, note the date approved and the expiration date of the permit along with the time it was approved.
16. After completing all fields, save your changes, download, print, or share the form as needed to ensure timely submission of your permit request.

Complete the Fire Alarm Installation/Revision Permit Form online to ensure your project complies with safety regulations.