Get Using The Total Station To Measure Elevation Difference - Usouthal

This guide aims to assist users in accurately completing the form titled 'Using The Total Station To Measure Elevation Difference - Usouthal.' By following the detailed instructions provided, users can efficiently navigate through each section of the form to ensure proper data entry.

Follow the steps to successfully fill out the form online.

1. Press the ‘Get Form’ button to access the form and open it in the editor, where you will initiate the filling process.
2. Carefully read the introduction and instructions provided on the form. Ensure you understand the procedure for measuring elevation differences using the Total Station.
3. Begin filling in the fields related to your measurements, starting with the name of the geologist, and ensuring all corners of the building are covered accurately.
4. For each corner, enter the height measured in meters and feet, referencing the values recorded during your fieldwork.
5. When measuring the elevation difference between the specified corners, document the slope distances and any relevant height adjustments as required.
6. Complete Problem 2 and Problem 3 sections as specified, ensuring all calculations are accurate and correspond with the required benchmarks.
7. Review the entire form for accuracy, checking each measurement and calculation to ensure they are correctly entered.
8. Once satisfied with the information provided, save your changes. You may then choose to download, print, or share the completed form as needed.

Complete your documentation by filling out the required form online today.