Get Hielding Subsystem Checklist For Existing Facilities. Da Form 7452-9-r, Feb 2002

Filling out the HIELDING SUBSYSTEM CHECKLIST for existing facilities is an essential task to ensure the proper functioning and safety of your facility's shielding systems. This guide will provide step-by-step instructions to assist you in completing DA FORM 7452-9-R, FEB 2002 online.

Follow the steps to complete the form efficiently.

1. Click the ‘Get Form’ button to obtain the HIELDING SUBSYSTEM CHECKLIST. This will allow you to access the form and open it in your preferred editor for filling.
2. Begin with section 1, 'FACILITY.' Input the name of the facility you are inspecting. Ensure accuracy to avoid confusion in records.
3. In section 2, 'DATE (YYYYMMDD),' enter the date of the inspection in the specified format. This date will document when the assessment is conducted.
4. Complete section 3, 'LOCATION,' by providing the specific address or details of where the facility is situated. This information is critical for future reference.
5. Fill in section 4, 'INSPECTOR,' with the name of the individual or team conducting the inspection. This acknowledgment ensures accountability for the inspection process.
6. For section 5, perform a visual inspection of the existing shield network for proper grounding and signs of damage. Document any deficiencies in the provided locations.
7. In section 6, check shielding on all doors, windows, ventilation ports, visual access openings, and walls for proper installation and bonding. List any deficiencies as you identify them.
8. For section 7, review all utility lines, electrical conductors, and data cables for proper bonding and shielding. Indicate 'YES' or 'NO' for each specified requirement and provide details as necessary.
9. Complete section 8 by measuring stray currents on the ground circuits. Document the location of the measurements, the ground circuits involved, and the current measurements you record.
10. In section 9, measure the bond resistances as indicated. Ensure to note the location for clarity regarding where the measurements were taken.
11. Once all sections are completed, review the form for any missing information or errors. Make necessary corrections before proceeding.
12. After ensuring the form is fully completed, save your changes, download, print, or share the form as required for further processing.

Get started on your HIELDING SUBSYSTEM CHECKLIST online to ensure your facility meets all shielding requirements.