Get Carrier Smb 09 0022

Filling out the Carrier Smb 09 0022 form accurately is essential for the proper inspection and documentation of furnace heat exchangers. This guide provides step-by-step instructions to assist users in completing the form effectively.

Follow the steps to accurately complete the Carrier Smb 09 0022 form.

1. Click the ‘Get Form’ button to access the Carrier Smb 09 0022 document in the online editor.
2. Begin by filling out the required fields indicated with an asterisk (*), such as the customer name, address, and phone number. Ensure that all personal information is accurate.
3. Input the furnace model number and serial number, which can usually be found on the unit's identification label.
4. Record the CO reading in parts per million (ppm) and the excess air level percentage, noting that both readings are required if the furnace is operational.
5. Proceed to the installation checklist and mark all areas that have been examined during the inspection, confirming compliance with the inspection procedure.
6. In the maintenance items section, check all items that were cleaned or inspected, including air filters, blower motor/wheel, and heat exchangers.
7. After completing the inspection and addressing any maintenance issues, conduct a combustion retest and document any observed CO readings and excess air levels for the second test.
8. Review your inputs for accuracy and completeness. Ensure all required fields marked with a double asterisk (**) have been filled out.
9. Sign the form in the designated area to certify the inspection results. Be sure to fill in your name and dealer information.
10. Submit the completed form by faxing it to Warranty Administration at (860) 998-2941 or emailing it to admin.sams@carrier.utc.com with SMB09-0022 in the subject line.

Complete your Carrier Smb 09 0022 online today for efficient furnace inspection documentation.