Get Airia Desk Installation

This guide will walk you through the process of completing the Airia Desk Installation form online. Each step is designed to be straightforward, enabling users to efficiently provide the necessary information for a successful installation of their desk.

Follow the steps to accurately complete your installation form.

1. Click ‘Get Form’ button to obtain the Airia Desk Installation form and open it in the designated editor.
2. Begin by reviewing the parts included with your desk, which are: desk top, four legs, small organizer tray, two large organizer trays, two brackets, sixteen lock nuts, and a wrench.
3. Locate the section on how to assemble your desk. In the first step, position the desk top upside down on a clean, soft surface to prevent scratches.
4. Install the bracket over the two bolts on the edge of the top as illustrated. Loosely attach this bracket with two lock nuts. Do not tighten yet, and repeat this process for the remaining bracket on the opposite edge.
5. Proceed to install each leg by placing it over the three bolts in the corner of the desk top. Ensure the face of the leg is aligned with the outer edge of the desk top, and loosely attach it using three lock nuts. Repeat this for all remaining legs.
6. Once all legs are attached, tighten all lock nuts on the legs and brackets using the wrench provided.
7. With the assistance of another person, carefully turn the desk to the right side up.
8. Remove any existing packaging around the drawer to prepare for organization.
9. Place the covers onto the top of the desk to complete the assembly process.
10. Open the drawer and place the organizer trays inside for optimal use.
11. Finally, adjust the leveling glides by rotating them to ensure the desk stands firmly.

Complete your Airia Desk Installation online for a smooth setup experience.