Get Hydrant Flushing Form

Filling out the Hydrant Flushing Form online is a straightforward process that ensures accurate documentation of hydrant flow tests. This guide will provide you with step-by-step instructions to complete the form efficiently.

Follow the steps to accurately complete the Hydrant Flushing Form.

1. Click ‘Get Form’ button to obtain the form and open it in the online editor.
2. Enter the date of the test in the designated field.
3. Fill in the time the test was completed.
4. Provide your name or the name of the person completing the form in the 'Completed By' section.
5. For the Residual Hydrant (Point 'A'), fill in the location or address where the hydrant is situated.
6. Enter the hydrant number for identification.
7. Record the static pressure from the gauge in 'Static' field.
8. Measure and input the residual pressure reading in the 'Residual' field.
9. After two minutes of flow, document the static pressure in the relevant section.
10. For the Flow Hydrant (Point 'B'), input the location or address of the hydrant where the flow test was conducted.
11. Indicate the hydrant number for the flow test.
12. Select the flow type or reason for conducting the test from the provided options: Fire, Flush, or Flow Test.
13. Indicate which nozzles were flowed by marking 1-1/2”, 2-1/2”, or 4-1/2” where applicable.
14. Fill in the starting static pressure and record the start and stop times of the test.
15. Document the minimum flow duration in minutes during the test and the total gallons flowed.
16. Input the Pitot gauge discharge readings in GPM and the corresponding coefficient.
17. Add any comments or observations relevant to the test in the comments section.
18. If needed, draw a map on the back of the form to provide additional context.
19. Once all fields are thoroughly filled out, save your changes, and choose to download, print, or share the completed form as required.

Complete the Hydrant Flushing Form online today for efficient documentation of your hydrant flow tests.