Get Material Safety Data Sheet Optiguard

This guide provides clear and user-friendly instructions for completing the MATERIAL SAFETY DATA SHEET OPTIGUARD. Following these steps will ensure you accurately fill out the necessary information for safety compliance and effective communication.

Follow the steps to fill out the MATERIAL SAFETY DATA SHEET OPTIGUARD online

1. Press the ‘Get Form’ button to access the MATERIAL SAFETY DATA SHEET OPTIGUARD form and open it in your preferred format.
2. In section 1, identify the manufacturer by entering the name 'Kerr Corporation' and the address: 1717 West Collins Avenue, Orange, CA 92867-5422. Provide the contact telephone number: 1-800-KERR-123, and for emergencies, list Chemtrec: 1-800-424-9300. Finally, include the date prepared: March 3, 2005.
3. In section 2, provide composition information. Enter the hazardous ingredients, specifically 'Uncured Methacrylate Ester Monomers' with the CAS # 109-16-0 and indicate it constitutes 90-95%. Then, add the other ingredients, 'Photoinitiators and stabilizers,' which are 5-10%.
4. Section 3 requires physical and chemical properties. Fill out details such as boiling point (N/D), specific gravity (1.1), and mention the appearance and odor as a light yellow liquid with a fruity ester-like odor.
5. In section 4, address fire and explosion hazard data. Make sure to indicate the types of extinguishing media to use and any special fire fighting procedures like wearing self-contained breathing apparatus.
6. Section 5 covers reactivity data. Document the stability of the material if stored properly and enumerate conditions to avoid such as heat and contamination.
7. Section 6 focuses on health hazard data. Specify routes of entry, noting potential hazards for skin, eyes, inhalation, and ingestion. Mention any carcinogenicity status.
8. In section 7, outline emergency first aid procedures for skin contact, eye contact, inhalation, and ingestion. It’s vital to provide clear instructions on what to do in case of an emergency.
9. Proceed to section 8, detailing precautions for safe handling, including recommended protective equipment and hygiene practices.
10. Section 9 is for control measures. Note the type of respiratory protection needed, ventilation, and information about personal protective equipment.
11. In section 10, transportation information is provided. Note that the material is not DOT regulated.
12. Finally, review section 11 for special information, including HMIS ratings. Ensure to reiterate that the hazard information pertains to the uncured state of the material.
13. Once all sections are completed, users can save changes, download the document, print it, or share it as necessary.

Complete your documents online today for better compliance and safety management.