Get Shop Magnetic Particle Testing Report Dsa

Filling out the Shop Magnetic Particle Testing Report DSA accurately is essential for documenting the results of your magnetic particle testing. This guide provides clear, step-by-step instructions to help you complete the report smoothly and efficiently online.

Follow the steps to fill out the Shop Magnetic Particle Testing Report DSA online

1. Click 'Get Form' button to obtain the form and open it in your preferred online editor.
2. Begin by entering the DSA file number, application number, and LEA number at the top of the report.
3. Fill out the job name and job number to identify the testing performed.
4. Record the date and job location where the magnetic particle testing was conducted.
5. Indicate the time arrived at the job location and the time departed after completing the testing.
6. Document the weather conditions during the time of the inspection.
7. Measure and record the mileage and travel time involved in reaching the job site.
8. Specify the type of material that was tested and its surface condition.
9. Note the temperature of the material at the time of testing.
10. Indicate the examination standard and the acceptance standard that apply to this testing.
11. Fill in the N.D.T. procedure number along with the amperage settings used during the testing.
12. Record the spacing of the products and the colors of the particles used.
13. Document the manufacturer information for the black light and its serial number.
14. Provide the model number and manufacturer details of the light meter.
15. Specify the method of testing, selecting options such as Yoke, Coil, Prods, and note whether it was Dry or Wet, Visible or Fluorescent.
16. Indicate if AC, DC, or Rectified methods were employed.
17. Record the equipment serial number and model number used in the procedure.
18. Specify the particle type and manufacturer information related to the testing.
19. Provide details for the method of testing, including brands and batch numbers of the penetrant, dwell time, and any applicable serial numbers.
20. Fill in the details of the cleaner that was used during testing, including brand and batch information.
21. Indicate whether the post emulsified methods used were Water Washable or Removable.
22. Document the developer brand name and batch number, along with development time whether dry or wet.
23. Sign and date the certification statement, ensuring accuracy in testing and compliance with regulations.
24. Note any exceptions or non-compliance and provide details if corrective actions were taken.
25. Finalize by saving the changes made, downloading a copy for your records, and printing or sharing the completed report.

Complete your Shop Magnetic Particle Testing Report DSA online today!