Get Good To Go Flex Pass Installation

This guide provides clear instructions on how to complete the Good To Go Flex Pass Installation online. It aims to assist users in properly installing their Flex Pass for hassle-free toll usage.

Follow the steps to successfully install your Flex Pass.

1. Click ‘Get Form’ button to obtain the form and open it in an online editor.
2. Snap your Flex Pass into the provided plastic clip, ensuring it is securely attached.
3. Flip the assembled clip with the Flex Pass over so that the switch is facing down towards the windshield.
4. Position your pass inside the front windshield, ensuring it is no more than 6 inches below the roofline and at least 2 inches below the rearview mirror or any metallic sun strips, while avoiding obstruction of the driver’s view.
5. Peel off the backing from one side of the dual-lock fastener strips and apply it to the plastic clip. Note that the fastener strip might partially cover the red/white switch window.
6. Clean the inside of your windshield using rubbing alcohol or glass cleaner to ensure proper adhesion.
7. Mount the plastic clip to the inside of the windshield by peeling the backing off the fastener strips and adhering the clip securely.
8. Important: Once attached, do not move your Flex Pass between vehicles as it may not function correctly. If relocation is necessary, contact customer service at 1-866-936-8246 for assistance.
9. Once completed, you can save the information for future reference or share it as needed.

Ensure a smooth toll experience — complete your installation of the Good To Go Flex Pass online today.