Get MATERIAL SAFETY DATA SHEET (REACH) Revision Date: 18/06/2010 Page 1/8 DUEPOL POLIURETANO SUELOS

Employers must make sure that all controlled products have an up-to-date (less than three years old) MSDS when it enters the workplace. The MSDSs must be readily available to the workers who are exposed to the controlled product and to the health and safety committee or representative.

Employers must make sure that all controlled products have an up-to-date (less than three years old) MSDS when it enters the workplace. The MSDSs must be readily available to the workers who are exposed to the controlled product and to the health and safety committee or representative.

Manufacturers and importers of hazardous chemicals must review and update the information in an SDS every 5 years. All SDS must list the date when it was last reviewed and updated. This date is usually written in Section 16 – Any other relevant information, of the SDS.

A manufacturer, importer, supplier, or employer shall check the accuracy of a Safety Data Sheet (SDS) based on the actual circumstances and update it as needed. A Safety Data Sheet shall be reviewed at least every 3 years. Records of SDS updates such as content, date, and version revision, shall be kept for 3 years.

Manufacturers and importers of hazardous chemicals must review and update the information in an SDS every 5 years. All SDS must list the date when it was last reviewed and updated. This date is usually written in Section 16 – Any other relevant information, of the SDS.

A manufacturer, importer, supplier, or employer shall check the accuracy of a Safety Data Sheet (SDS) based on the actual circumstances and update it as needed. A Safety Data Sheet shall be reviewed at least every 3 years. Records of SDS updates such as content, date, and version revision, shall be kept for 3 years.

How to Read a Material Safety Data Sheet Section I – Material Identification: ... Section II – Hazardous Ingredients/Identity Information: ... Section III – Physical/Chemical Characteristics: ... Section IV – Fire and Explosion Hazard Data: ... Section V – Reactivity Data: ... Section VI – Health Hazard Data:

How to Read a Material Safety Data Sheet Section I – Material Identification: ... Section II – Hazardous Ingredients/Identity Information: ... Section III – Physical/Chemical Characteristics: ... Section IV – Fire and Explosion Hazard Data: ... Section V – Reactivity Data: ... Section VI – Health Hazard Data:

For most people who work with hazardous products, you should always: read the name of the chemical (Section 1), know the hazards (Section 2), understand safe handling and storage instructions (Section 7), and. understand what to do in an emergency (Sections 4, 5 and 6).

For most people who work with hazardous products, you should always: read the name of the chemical (Section 1), know the hazards (Section 2), understand safe handling and storage instructions (Section 7), and. understand what to do in an emergency (Sections 4, 5 and 6).

Section 6: Accidental Release Measures The required information may consist of recommendations for: Use of personal precautions (such as removal of ignition sources or providing sufficient ventilation) and protective equipment to prevent the contamination of skin, eyes, and clothing.

Section 6: Accidental Release Measures The required information may consist of recommendations for: Use of personal precautions (such as removal of ignition sources or providing sufficient ventilation) and protective equipment to prevent the contamination of skin, eyes, and clothing.

Following GHS guidelines, SDS must include 16 specific sections which are grouped into four categories: 1) general information about the chemical, 2) technical and scientific information, 3) information governed by other agencies and 4) other.

Following GHS guidelines, SDS must include 16 specific sections which are grouped into four categories: 1) general information about the chemical, 2) technical and scientific information, 3) information governed by other agencies and 4) other.

Section 16 – Other information indicates when the SDS was prepared or when the last known revision was made. The SDS may also state where the changes have been made to the previous version. You may wish to contact the supplier for an explanation of the changes. Other useful information also may be included here.

Section 16 – Other information indicates when the SDS was prepared or when the last known revision was made. The SDS may also state where the changes have been made to the previous version. You may wish to contact the supplier for an explanation of the changes. Other useful information also may be included here.

To locate the correct MSDS, always use the product identifier, not a shortened name that may be used at your workplace. Check that the name of the manufacturer and/or supplier matches the label as well. The MSDS and label may also display other identification, such as a product code or catalog number.

The MSDS lists the hazardous ingredients of a product, its physical and chemical characteristics (e.g. flammability, explosive properties), its effect on human health, the chemicals with which it can adversely react, handling precautions, the types of measures that can be used to control exposure, emergency and first ...

To locate the correct MSDS, always use the product identifier, not a shortened name that may be used at your workplace. Check that the name of the manufacturer and/or supplier matches the label as well. The MSDS and label may also display other identification, such as a product code or catalog number.

SECTION 1 — PRODUCT IDENTIFICATION AND USE. SECTION 2 — HAZARDOUS INGREDIENTS. SECTION 3 — PHYSICAL DATA. SECTION 4 — FIRE AND EXPLOSION DATA. SECTION 5 — REACTIVITY DATA. SECTION 6 — TOXICOLOGICAL PROPERTIES. SECTION 7 — PREVENTIVE MEASURES. SECTION 8 — FIRST AID MEASURES.

Section 4, First-aid measures includes important symp- toms/effects, acute, delayed; required treatment. Section 5, Fire-fighting measures lists suitable extinguishing techniques, equipment; chemical hazards from fire.

The MSDS lists the hazardous ingredients of a product, its physical and chemical characteristics (e.g. flammability, explosive properties), its effect on human health, the chemicals with which it can adversely react, handling precautions, the types of measures that can be used to control exposure, emergency and first ...

SECTION 1 — PRODUCT IDENTIFICATION AND USE. SECTION 2 — HAZARDOUS INGREDIENTS. SECTION 3 — PHYSICAL DATA. SECTION 4 — FIRE AND EXPLOSION DATA. SECTION 5 — REACTIVITY DATA. SECTION 6 — TOXICOLOGICAL PROPERTIES. SECTION 7 — PREVENTIVE MEASURES. SECTION 8 — FIRST AID MEASURES.

Section 4, First-aid measures includes important symp- toms/effects, acute, delayed; required treatment. Section 5, Fire-fighting measures lists suitable extinguishing techniques, equipment; chemical hazards from fire.