Get Infection Control Risk Assessment Template

This guide provides clear instructions on how to complete the Infection Control Risk Assessment Template online. By following the steps outlined, users can effectively assess the infection control risks associated with construction and renovation activities.

Follow the steps to fill out the Infection Control Risk Assessment Template online.

1. Press the ‘Get Form’ button to access the Infection Control Risk Assessment Template and open it in your preferred editor.
2. Begin by identifying the type of construction project activity. Refer to the Type A–D categories, ensuring to select the correct type based on your specific project activities.
3. Identify the Patient Risk Groups affected by the construction project. Check the corresponding boxes for Low, Medium, High, or Highest Risk Groups based on your project's impact.
4. Match the selected Patient Risk Group with the planned Construction Project Type in the matrix provided. This will help you determine the Class of Precautions required (I, II, III, or IV).
5. Document specific infection control precautions per class, detailing the required actions during the construction project to minimize risk. Include all necessary protocols for dust control and infection prevention.
6. Identify surrounding areas of the project site to assess potential impacts, including units above, below, and laterally adjacent.
7. Specify the exact site of the activity, capturing rooms or areas that will be impacted, such as patient rooms or medication areas.
8. Address any potential issues related to ventilation, plumbing, and electrical systems that may cause outages during construction.
9. Determine if work will be conducted during non-patient-care hours to minimize risk to patients.
10. Ensure plans accommodate the required number of isolation or negative air flow rooms based on risk assessments.
11. Confirm plans allow for an adequate number and type of handwashing sinks in compliance with facility guidelines.
12. Seek approval from infection prevention and control staff regarding the number of sinks allocated for the project.
13. Verify alignment with infection prevention and control staff concerning clean and soiled utility room plans.
14. Discuss containment issues with the project team, emphasizing traffic flow, housekeeping, and debris removal protocols.
15. Document responsibilities for project monitoring, ensuring all infection control concerns and risks are communicated clearly.
16. Remember that the Infection Control Risk Assessment may change throughout the project and require updates, which must be shared with the project manager.

Complete your documents online for effective infection control planning.