Get This Commissioning Checklist Is To Be Completed In Full By The Competent Person Who Commissioned

Filling out the This Commissioning Checklist is an essential step for demonstrating compliance with the appropriate building regulations. This guide provides a clear, step-by-step approach to completing the form online, ensuring a smooth process for persons who commission gas boiler systems.

Follow the steps to effectively complete the checklist.

1. Click ‘Get Form’ button to obtain the form and open it in the online editor.
2. Begin by entering the customer information, including their name, telephone number, and address. This information is vital for identification and communication purposes.
3. In the boiler section, input the make and model along with the serial number of the boiler. These details are necessary for tracking the specific equipment being commissioned.
4. Provide your name as the person who commissioned the boiler, along with your Corgi ID number and company name. Additionally, include your company’s telephone number and address.
5. Record the commissioning date. This serves as an official record of when the commissioning process occurred.
6. If applicable, fill in the Building Regulations Notification Number on receipt of the Building Regulations Compliance Certificate from the customer.
7. In the controls section, tick the appropriate boxes to indicate the installed controls, such as time and temperature control options for heating and hot water.
8. For the system check, confirm if the system has been flushed and cleaned as per the required standards. Provide details of the system cleaner and inhibitor used, specifying the quantity applied.
9. Measure and record the central heating mode parameters, including gas rate, burner operating pressure, gas inlet pressure, and central heating flow and return temperatures.
10. If applicable, answer the questions regarding combination boilers and the installation of water scale reducers in hard water areas.
11. Document the domestic hot water mode parameters similarly, ensuring to measure gas rates and check the water flow rate and temperatures from outlets.
12. For condensing boilers, confirm that the condensate drain has been installed correctly according to the manufacturer's instructions.
13. Complete the final checks confirming compliance with building regulations and that the boiler has been installed per the manufacturer's instructions, then have both the commissioning engineer and customer sign the document.
14. After all sections are completed, ensure to save your changes. You can then download, print, or share the completed form as needed.

Ensure you complete your commissioning checklist online today to maintain compliance and proper records.