Get Au University Of Sydney Cis Standard - Permit To Dig Form

This guide provides clear and comprehensive instructions on how to fill out the AU University of Sydney CIS Standard - Permit To Dig Form online. Whether you are a contractor or a project manager, this step-by-step approach will ensure you complete the form correctly and submit it in a timely manner.

Follow the steps to successfully complete the form online.

1. Click ‘Get Form’ button to obtain the form and open it in the online editor.
2. In Part A, enter the project details. Specify the type of works by ticking either 'Planned Maintenance' or 'Emergency'. Fill in the project name and location, and provide a description of the proposed service, including the dimensions of the ground excavation.
3. Continue with Part A by entering the excavation works program, including the start and end dates. Fill out the head contractor’s and sub contractor’s supervisor details, such as their names, companies, mobile numbers, and emails.
4. In Part B, conduct an existing asset investigation. Use the checklist to confirm the location of underground assets and complete the necessary boxes for each type of utility, marking 'Yes' or 'No' as applicable.
5. Complete Part C by identifying potential works hazards associated with the excavation. Again, use the checklist to confirm whether hazards such as slips, excavation collapse, and others are present.
6. In Part D, specify the required site controls needed to mitigate identified hazards. Confirm compliance with asset owners' directives and specify if traffic/pedestrian control plans are required.
7. Proceed to Part E to address surface reinstatement and backfilling plans. Check each item in the plan as applicable to the excavation works.
8. In Part F, ensure all required documents are attached. Confirm that documents like construction plans and risk assessments are included before submission.
9. In Part G, the head contractor and subcontractor must acknowledge and authorize the information provided in the form, including signatures and dates.
10. Lastly, submit the completed form to the University of Sydney Project Manager for final authorization. Ensure you save changes and download a copy for your records.

Complete the AU University Of Sydney CIS Standard - Permit To Dig Form online today to ensure your excavation works comply with necessary regulations.