Get 61649 Genisys Control Manual.indd

If the control locks out three times without a satisfied call for heat or fails the motor relay check, the Lockout becomes restricted in order to prevent repetitious resetting by the homeowner. To reset, hold the button down for 15 seconds until the red light turns off and the yellow LED turns on.

Action:The Genisys Primary Control is in a Restricted (hard) lockout This means the control has locked out 3 times. Additional Actions:Hold the reset button down for 15 seconds. When the reset light goes out, release the button. The control will reset.

0:20 5:28 Fixing a Hard Lockout on your Boiler! - YouTube YouTube Start of suggested clip End of suggested clip And you typically just have to press that so we're just going to try to press this button we're justMoreAnd you typically just have to press that so we're just going to try to press this button we're just gonna hold it. See what happens. Okay control reset. Three.

Customer: Burner reset - R7184 on a Beckett NX Burner. Rickheatdoc: Okay, you need to hold down the reset button for at least 30 seconds and release it from a hard lockout.

A hard lockout happens after several repeated soft lockouts. For most furnaces, you will have three attempts to relight the unit before it goes into hard lockout. If this happens, you will have to reset the unit manually by calling for furnace repair in Murrieta.

0:28 2:22 Genisys Reset - YouTube YouTube Start of suggested clip End of suggested clip Information. During normal burner operation. The green LED on the control will be illuminatedMoreInformation. During normal burner operation. The green LED on the control will be illuminated indicating that the burner has lit and the CAD cell has determined that the flame has been established.

0:12 4:07 How To Restart An Oil Furnace | Hard Lockout and Bleeding Fuel Lines YouTube Start of suggested clip End of suggested clip Has reset. And it's going to try to go through its cycle. So the flash is right there now I knowMoreHas reset. And it's going to try to go through its cycle. So the flash is right there now I know it's going to try to come through cycle.