Get Lte Demonstration Network Test Plan Phase 3 Part 1: Network ... - Pscr

This guide provides comprehensive instructions on completing the LTE Demonstration Network Test Plan Phase 3 Part 1: Network ... - Pscr online. Each section of the form is broken down into clear steps to ensure users have the necessary support to complete it accurately and efficiently.

Follow the steps to successfully fill out the test plan form.

1. Press the 'Get Form' button to access the document and open it in your editor.
2. Read through the introduction of the test plan to understand the testing objectives and scope. This ensures you are aligned with the expectations set by the Public Safety Communications Research (PSCR).
3. In the sections regarding network interoperability, fill out the details of the network elements under test. These may include various eNB (evolved Node B) configurations such as those with Cisco, Alcatel Lucent, and General Dynamics Broadband EPC.
4. Complete the test description for each network element. Describe how the interoperability of the eNB with different EPCs will be evaluated during the tests.
5. List the required equipment for each test scenario. Ensure to provide specifics on the types of devices, tools, and network setups needed for the procedures outlined.
6. Follow the test procedures explicitly as they are outlined. Use the sequence of operations for monitoring, data sessions, and specific commands to be executed during the testing.
7. Document the expected outcomes from each test section, noting key performance indicators like handover success rates and session stability.
8. Lastly, ensure to save your changes after filling out the required sections of the form. You can then download, print, or share the completed test plan as necessary.

Begin filling out the LTE Demonstration Network Test Plan Phase 3 Part 1: Network ... - Pscr online today to contribute valuable insights to network performance testing.