Get Report On Compaction Density Non-movement

Filling out the REPORT ON COMPACTION DENSITY NON-MOVEMENT online is an essential process for documenting compaction density test results for various construction projects. This comprehensive guide will help you navigate each section of the form effectively and ensure accurate completion.

Follow the steps to successfully complete the online form.

1. Press the 'Get Form' button to access the form for completion within your preferred online environment.
2. Begin by entering the date of the report in the designated field at the top of the form. Make sure the date is accurate and formatted correctly.
3. Next, fill in the contract number. This should correspond to the specific project related to the compaction tests.
4. Enter the district number, which identifies the geographical area of the project. This is crucial for regional records.
5. Indicate the specific route or section (SR/SECTION) of the roadway associated with the construction project by filling in the appropriate field.
6. Select the type of construction you are documenting by checking the appropriate box, ensuring only one type is checked.
7. For each test conducted, input the test number, time of test, type of material, and source of material in the respective fields.
8. Provide the location of the test, specifying either the station or segment/off-set location according to project plans.
9. Fill in the offset and subgrade elevation, as well as the test elevation and lift height. Ensure all measurements are in the correct units.
10. Document whether the test passed or failed by selecting the appropriate option (P for pass, F for fail).
11. Detail the determination of material retained on the 19 mm sieve by recording the mass of the sample and container, the mass of just the container, and the mass of the sample.
12. Enter the mass of the material retained on the 19 mm sieve, then calculate and record the percentage retained.
13. Capture details about the compaction equipment used by filling in the type, make, model, and the roller mass in the relevant fields.
14. Utilize the remarks section for any additional notes or comments related to the testing process or materials.
15. Lastly, indicate who conducted the testing by filling in their name in the 'Tested by' field.
16. After completing all sections, save your changes, download, print, or share the filled form as needed to maintain project records.

Complete your document online today for a streamlined filing experience.