Get Hmmwv Course Test Answers

-The M1151A1 has Integrated Armor Protection (IAP) and is armor ready, meaning it is designed to accept additional armor. -The unarmored M1151 has a crew and cargo weight capacity of about 4,000 lb.

The combat lock can be released by a lever from inside the vehicle. However, from the outside, a unique combat lock emergency release wrench is required.

Step 1: The BEST Car/Truck Options for Towing: ... Step 2: Line up Your Vehicle. ... Step 3: Raise the Coupler. ... Step 4: Back up the Rest of the Way. ... Step 5: Lower the Coupler onto the Hitch Ball. ... Step 6: Latch the Coupler. ... Step 7: Attach the Safety Chains in a Cross Pattern. ... Step 8: Retract the Trailer Jack.

The Humvee has four different models, namely A2 series vehicles, reliability extended vehicles, expanded-capacity vehicles and international vehicles.

While preparing to drive a HMMWV forward under normal conditions, in what position should you place the transmission and transfer case shift levers? Slow down prior to reaching the curve.

PERFORMANCE The M1165 is an Expanded Capacity Command and Control/General Purpose HMMWV. It is a four-man vehicle which can be used for a variety of missions, from command and control to armed patrol, and is available with an optional Weapons Mount and Turret.

Like the previous jeep, the basic HMMWV has no armor or protection against chemical, biological, radiological, or nuclear threats. Nevertheless, losses were relatively low in conventional operations, such as the Gulf War.

Make sure you drive slowly through the puddles. After you clear the puddle, apply gentle pressure to your brakes so you can air the brakes out and dry them off. If you come across another puddle or a pothole, don't slam on your brakes. Coast through them, or slow down before you hit the puddle or pothole.

The current engine oil pressure requirements in all HMMWV national maintenance work requirements (NMWRs) and technical manuals have been revised. Operating oil pressure requirements for engine rpm above idle should be changed from 30-50 psi to 25-65 psi and 30 psi should be changed to 25 psi.