Get 19962- Sd-dst - Delta Faucet

Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service. Replacement parts may be obtained by calling 1 800 345 DELTA (3358) or by writing: Delta Faucet Company Product Service 55 E.

All new faucets sold since 1994 are required to have flow restrictors in order to conserve water. Different aerators and flow restrictors can be purchased, which will increase or decrease the rate of flow.

Step 1: Close the water valves. Begin by turning off the water valves, found under the sink. ... Step 2: Open the base. ... Step 3: Protect your sink. ... Step 4: Remove the flow restrictor. ... Step 5: Check and reassemble.

Pull out the spout and clamp the hose to prevent it from retracting. Grip the collar at the end of the hose with pliers and unscrew the spray head. Look for the aerator inside the collar or the spray head. ... Work out the aerator gently, using a flat-head screwdriver.

Did you know your Delta Kitchen Faucet has a small part built into it that slows down the flow of water. It's called a flow restrictor, also sometimes called a regulator, and it's designed to help save water and lower your bills.

If you are noticing decreased water pressure or a poor quality flow rate, you may have debris in your flow restrictor or the screen filter in your shower head or aerator. Often this is easily remedied with a simple cleaning process.

Loosen the small unit at the tip of the faucet by turning it with your fingers. If it is too tight to turn with your fingers, wrap it in a bit of cloth and loosen it with pliers.

Step 1: Close the water valves. Begin by turning off the water valves, found under the sink. ... Step 2: Open the base. ... Step 3: Protect your sink. ... Step 4: Remove the flow restrictor. ... Step 5: Check and reassemble.