Get How To Seal &

Sealing natural and reconstituted limestone and sandstone is essential for preserving their beauty and durability. This guide will provide you with clear, step-by-step instructions to effectively use the How To Seal & document online.

Follow the steps to successfully fill out the How To Seal & document.

1. Click ‘Get Form’ button to obtain the document and open it in your browser.
2. Carefully read the introductory information provided in the document. It details the importance of using the LIMESTONE & SANDSTONE SEALER to protect against discoloration and damage.
3. Fill in the coverage area by indicating that 1 litre of sealer will cover approximately 1m² of stone. Ensure to provide accurate measurements for your specific project.
4. Specify the application method. You may choose to use a brush, roller, or spray application. For best results, indicate your preference for spraying, and describe that it should be applied horizontally in a flood coat from top to bottom.
5. Indicate the number of coats required. The document states that 2 coats of sealer are needed. Ensure you have accounted for this in your project planning.
6. Record the drying and recoat times. State that 30 minutes of drying time is necessary between coats and note that surfaces should not come into contact with water for at least 24 hours after the final coat.
7. Describe the clean-up process. Indicate that the LIMESTONE & SANDSTONE SEALER can be easily cleaned up with water before it dries.
8. For testing moisture levels, include the tip of using clear plastic sheeting to ensure the surface is dry before applying the sealer.
9. After filling out all relevant sections, save the document appropriately. You may choose to download, print, or share the form as needed.

Start sealing your surfaces today by filling out the How To Seal & document online.