Get Soclean Rebate

The SoClean check valve assembly and filter cartridge should be replaced every 6 months. A reminder message on the display will appear after approximately 6 months, depending upon usage.

To keep your SoClean running optimally, you'll need to change its filter and check valve about every six months.

7. How long does the SoClean need to run? The SoClean 2 runs a 7-minute cycle plus a 2 hour rest period. This ensures proper maintenance of the equipment and the rest period allows the Activated Oxygen (ozone) to convert back into regular oxygen.

Your CPAP equipment is completely sanitised every time you use the SoClean. However, the SoClean will not remove facial oils or dust or other foreign materials. You should hand wash your CPAP equipment with the pre-wash solutions every 5-6 weeks.

Keep the tubing connected to your mask and your humidifier. The SoClean unit will automatically turn on a predetermined time every morning (you set the timer) and cycles for about 2 hours. It doesn't use any water or messy chemicals and your equipment remains completely dry.

The SoClean 2 does not use water or chemicals. The SoClean 2 device does not use any chemicals or water to clean your CPAP machine. ... It uses ozone to clean your CPAP machine and make sure that your CPAP equipment stays completely dry and does not get messy.

Cycle Indicator Light The lighted bar below the clock display indicates which stage of the disinfecting cycle the SoClean is in. ... YELLOW when the SoClean is in its 2-hour disinfecting cycle. GREEN when disinfecting has been successfully completed. The lighted display will turn off once the lid is lifted.

A SoClean cleaning cycles typically take around 7 minutes to complete. Do not run the SoClean machine for longer than 30 minutes consecutively. Q What kind of CPAP Machines can be used with the SoClean 2 Machine?

The color codes used in the SoClean are RED when the SoClean is operating and generating activated oxygen. YELLOW when the SoClean is in its 2-hour sanitizing cycle. GREEN when sanitizing has been successfully completed. If a cycle is interrupted it will flash either yellow or red for that program that it was running.