Get Mcd & Pfh (8 Ton) Warranty Inspection - Liebert

This guide provides a clear and comprehensive overview of how to complete the MCD & PFH (8 Ton) Warranty Inspection - Liebert form online. By following these detailed instructions, users can ensure that all necessary information is accurately submitted to maintain their equipment warranty.

Follow the steps to successfully complete the warranty inspection form.

1. Click the ‘Get Form’ button to access the MCD & PFH (8 Ton) Warranty Inspection document. This will open the form in the online editor for you to begin filling it out.
2. In the first section, you will need to provide detailed information about the installer and the owner. Fill in the fields for the installer’s name and address, as well as the owner’s name, address, and email address.
3. Enter the installation date in the designated field.
4. Indicate whether the unit was received in good condition by selecting 'Yes' or 'No.' If you select 'No,' ensure to note if the carrier has been notified.
5. Confirm if the manuals have been kept with the unit by selecting 'Yes' or 'No.'
6. Next, fill out the pre-start-up section with the serial and model numbers for both the condenser and indoor unit as well as the compressor numbers.
7. Follow the inspection warnings carefully and check that the placement of the condenser is correct, with at least 18 inches of clearance from obstructions, and that all piping and electrical connections are secure.
8. Proceed to the condenser inspection section where you will record voltage readings and check the unit's electrical phasing.
9. Complete the air-cooled field charge verification process and record necessary temperatures and pressures as required.
10. After completing the inspection, review all entries for accuracy. Once confirmed, you can save changes, download, and print the completed form. Finally, share the form with your local Liebert sales office for warranty establishment.

Complete your documents online today to ensure your warranty is properly filed.