Get Surface Water Sampling Form

This guide provides a clear and detailed explanation of how to effectively fill out the Surface Water Sampling Form online. By following these steps, users will ensure that they accurately document essential information related to surface water monitoring.

Follow the steps to complete the Surface Water Sampling Form online.

1. Click ‘Get Form’ button to obtain the form and open it in your preferred online editor.
2. Begin by entering the site name in the designated field. This identifies the location of the sampling point.
3. Input the surface monitoring point number. This number is essential for tracking and managing sampling data.
4. Indicate the name of the person filling out the form. Accurate attribution is important for follow-up.
5. Provide the permit number associated with the sampling site. This ensures compliance with regulatory requirements.
6. Record the date and time of the sampling event. This information is critical for maintaining a timeline of monitoring activities.
7. In section A, choose the type of monitoring point by selecting one of the options: Stream, Road Ditch, Drainage Ditch, Open Tile, Tile with Riser, or Other. If you select 'Other,' provide a brief description.
8. In section B, state the purpose of the monitoring point by selecting Upstream, Within Landfill, Downstream, or Other. Include a description if you select 'Other.'
9. Move to section C, where you will assess the monitoring point conditions. Provide a general description of the condition.
10. Answer yes or no to the questions regarding whether the monitoring point was dry, if water was flowing, and if there was too little water to sample. If applicable, estimate the quantity of water.
11. Respond to whether the water was discolored and provide an estimate of the depth if it was. Describe the discolouration as needed.
12. Indicate if there was an odor present and provide a description if applicable.
13. Enter observations about any ground discoloration, litter present, and provide detailed descriptions as necessary.
14. In section D, record the weather conditions and field measurements after stabilization. Include temperature and pH, ensuring to specify the units used.
15. Acknowledge your understanding by signing the certification section. Enter your date, telephone number, fax number, and email address.
16. Attach an 8 ½” x 11” site plan showing the locations of all surface and groundwater monitoring points.
17. Once all information is filled in, save your changes, and choose whether to download, print, or share the form as needed.

Complete your Surface Water Sampling Form online today for efficient tracking and compliance.