Order Result Recommendations OWNER S NAME AND ADDRESS Inspector sign CONTRACTOR S NAME AND ADDRESS Test Listed By Report to Div. Of Fire Prevention Fire Department B FORM FP 85 Rev. 6/03. Plumbing Division Sprinkler Inspection Report Premises Approved Plan Construction Borough Stories Occupancy Supply City Water Connection Size Curb or P. I. Valve Valves sealed open Gravity Tank Capacity Size fill line Type and Size Ladder secured Capacity in gallons Fed 2 ways Name size of meter Lbs. Pressure Tank House Heated Location tank check and control valves Size No* Alarm Valves High-Low Gravity Type Dry Valve room heated Size and type High-Low Pressure Name Air Pressure Size dead risers Floor control valves Location inspectors Test valve Location No* Dry Valves No* of heads controlled by each dry pipe valve Fire Pumps Wet or Dry Heated Height over top sprinkler line Size Overflow Emergency Drain Valve Tank piping brass Exposed piping weatherproofed No* Fill Pumps How operated Pressure Tank Ca....
Open form follow the instructions
Easily sign the form with your finger
Send filled & signed form or save
How to fill out the NYC B Form FP 85 online
Filling out the NYC B Form FP 85 online is an essential process for ensuring compliance with plumbing and fire safety regulations. This guide provides clear and supportive instructions to help users navigate each section of the form with ease.
Follow the steps to complete the NYC B Form FP 85 online
- Click 'Get Form' button to obtain the form and open it in your preferred online editor.
- Begin by entering the premises information, including the approved plan number, construction details, borough, number of stories, and occupancy classification.
- Provide details on the city water connection, including the supply size, curb or P.I. valve specifications, and any valves that are sealed open.
- Fill in information regarding the gravity tank, such as its capacity, fill line size, type, and valve security measures.
- List the tank house details, specifying the type, size, and location of tank check and control valves.
- Detail the fire pump information including wet or dry selection, size overflow, emergency drain valve specifications, and overall system operability.
- Complete the section on booster pumps, ensuring to check the size of the discharge line and verify adequate pressure in the system.
- Input recommendations, if applicable, and provide the owner's name and address, followed by the contractor's name and address.
- Include the inspector's signature and print name, along with any additional test listings as required.
- After completing all sections, review your entries for accuracy. Save your changes, and then download, print, or share the filled-out form as necessary.
Complete the NYC B Form FP 85 online today to ensure compliance and safety.
Experience a faster way to fill out and sign forms on the web. Access the most extensive library of templates available.
Related content
CONTRACTOR'S NAME AND ADDRESS. Inspector (sign). Inspector (print). Test Listed. By...
No, our certificates and courses are open enrollment. Declare candidacy by submitting a...
7210 SAS-M, T, X, R6 Basic System Configuration Guide. This guide describes basic system...
Get answers to your most pressing questions about US Legal Forms API.
What is the sprinkler 3 times rule?
The “three times rule” to limit the impact of obstructions on water distribution requires that standard sprinklers be located a distance away from the obstruction of at least three times the width of the obstruction. The standard notes a maximum clearance of 24 in. from an obstruction.
When were sprinklers required in buildings in NYC?
In 2004 the city passed a law requiring owners to sprinkler systems in office buildings that are 100 feet or more in height.
How often should a sprinkler system be tested?
How often should you have your fire sprinkler system tested? Fire Sprinkler ComponentTesting ScheduleDry sprinklers (Test or Replace)Every 10 yearsFast-response sprinklers (Test or Replace)20 years initially, then every 10 yearsStandard response sprinklers (Test or Replace)50 years initially, then every 10 years5 more rows • Aug 18, 2019
What is the sprinkler law in NYC?
All buildings must have their Sprinkler and Standpipe Systems painted. Painting requirements are outlined in Local Law 58 of 2009 and BC 903.6 and 905.11.
What buildings in NYC require sprinklers?
As a general rule, all Group R occupancies in New York City must be equipped with an automatic sprinkler system....When Are Automatic Sprinkler Systems Required in Residential Buildings? Detached one-family dwellings. Detached two-family dwellings. Townhouses, also known as multiple single-family dwellings.
How often do sprinklers need to be inspected in NYC?
Monthly, quarterly, and annual inspections are mandatory and the FDNY must witness your flow test once every five years.
What size building requires a sprinkler system?
What size Building Requires a Sprinkler System? ing to NFPA 13, all newly constructed commercial buildings that are 5,000 square feet or larger are required to have fire sprinkler systems.
Are sprinkler systems required in NYC?
All buildings must have their Sprinkler and Standpipe Systems painted.
What OSHA standards require sprinkler systems?
1910.159 - Automatic sprinkler systems.
Do all NYC apartments have sprinklers?
In fact, a majority of older residential buildings in New York City lack fire sprinklers. Only newer buildings with three or more apartments and townhouses with more than three stories constructed after 1999 are required to have automatic sprinkler systems.
Use professional pre-built templates to fill in and sign documents online faster. Get access to thousands of forms.
If you believe that this page should be taken down, please follow our DMCA take down process here.