Get To Insure The Quality Of The Installation And The Proper Operation Of This Unit, The Following

This guide provides detailed instructions on how to fill out the form titled 'To Insure The Quality Of The Installation And The Proper Operation Of This Unit' effectively. By following these steps, users will ensure a smooth and accurate completion of the document online.

Follow the steps to complete the form successfully.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Fill in the job name, tag, model number, and serial number in the designated fields to ensure accurate tracking of the specific installation and unit.
3. Enter the contractor's information and the name of the person testing the unit, along with the date. This ensures accountability and record-keeping.
4. Review the pre-start-up checklist section. Ensure that all power is 'off' and disconnects are in the 'off' position before proceeding.
5. For indoor units, confirm connections and separation of vent pipes as specified in the guidelines to avoid any obstructions and ensure proper airflow.
6. For rooftop units, check that all ductwork is connected and sealed per installation instructions.
7. Verify the circuit breaker amperage and ensure it does not exceed the full load amperage listed on the nameplate.
8. If applicable, set sheaves according to the job requirements and ensure belts are properly tensioned and aligned.
9. Confirm that blower wheels are spinning freely and are correctly aligned within the housing.
10. Ensure all prefilters are correctly placed in the correct airstreams for efficient operation.
11. Initiate the start-up procedure by supplying power to the unit and following safety precautions. Begin testing all components while the unit is running.
12. Record operating voltage and amperage for each motor to ensure compliance with designated specifications.
13. Check the rotation of the blower wheels and correct any wiring errors if the rotation is incorrect.
14. Use an air velocity manometer to measure airflow in both supply and exhaust airstreams, comparing the results against design conditions.
15. Check all control sequences to ensure they function properly before concluding the installation process.
16. Once all sections are filled out, make sure to save your changes, download, print, or share the completed form as necessary.

Complete your document now by following these clear steps online.