Get Lucky Guard Electronic Safe Operating Instructions

This guide provides clear instructions on how to complete the Lucky Guard Electronic Safe Operating Instructions effectively. By following these steps, you will ensure that your electronic safe is set up and ready for secure use.

Follow the steps to fill out the Lucky Guard electronic safe operating instructions.

1. Press the ‘Get Form’ button to access the form and open it in the editor.
2. Start by installing 4 AA batteries. Remove the cover located between the knob and the keypad. Use the emergency key to open the door and access the battery box inside.
3. To change the code, keep the door open and find the red button near the hinge on the back of the door. Press the button, and you will hear two beeps while a yellow light illuminates for 10 seconds.
4. Input a new code consisting of 3 to 8 digits, followed by pressing the appropriate button based on your model. Confirm the storage of the new code with two beeps.
5. Before closing, test the new code with the door open to ensure functionality.
6. To close the safe, turn the knob counter-clockwise to engage the locking mechanism.
7. To open the safe, input your code and press the correct button, then turn the knob clockwise within 5 seconds to unlock.
8. Be aware that if an incorrect code is entered three times, the system freezes for 20 seconds.
9. If both the red and green lights are illuminated while the safe is open, change the batteries, ensuring you only use 4 AA alkaline batteries.
10. For emergencies, if you have forgotten your code or experienced electronic failure, use the override key to unlock the safe.
11. Note the important warnings, such as not storing your emergency keys inside the safe and ensuring you keep the serial number accessible for customer service purposes.
12. After completing all steps, be sure to save changes and print or share the form as needed.

Complete your Lucky Guard Electronic Safe Operating Instructions online today.