Get Smartfusion2 Usb Lab Guide Tutorial - Microsemi

This guide provides detailed instructions on completing the SmartFusion2 USB Lab Guide Tutorial - Microsemi online, ensuring users can effectively navigate through each section and field of the document. Follow these clear steps to enhance your understanding and execution of the tutorial.

Follow the steps to fill out the SmartFusion2 USB Lab Guide Tutorial - Microsemi successfully.

1. Click the ‘Get Form’ button to obtain the form and open it in your online editor.
2. Read through the introduction section to understand the objectives of the lab, which demonstrate the functionality of the SmartFusion2 USB On-The-Go Controller.
3. Review the components used in the SmartFusion2 device, ensuring you are familiar with any technical details that may influence your work.
4. Follow the tutorial requirements carefully, confirming you have the necessary software and hardware prepared for the lab.
5. Begin filling out the first section by downloading the firmware drivers as instructed to access all necessary components.
6. Create a Libero SoC Project, paying close attention to the configuration settings specified for the SmartFusion2 Microcontroller Subsystem.
7. Modify the default I/O settings as per the instructions, ensuring all configurations align with the project requirements.
8. Continue through each step of the guide, including synthesizing the design, programming the device, and running the firmware application as outlined.
9. At the end of the document, ensure you have thoroughly reviewed any output results and documented important data as specified.
10. After completing all sections, save your changes, and choose to download, print, or share your completed form for future reference.

Start filling out the SmartFusion2 USB Lab Guide Tutorial - Microsemi online today to enhance your project experience!