Get G2403a Lan/rs232 Converter Installation Guide, How To Lan A 5890 Ii Gc

This guide provides clear instructions on how to complete the G2403A LAN/RS232 Converter Installation Guide for the 5890 II Gas Chromatograph. By following these comprehensive steps, users can ensure a successful setup and configuration.

Follow the steps to complete the installation guide effectively.

1. Click ‘Get Form’ button to access the installation guide document and open it in your preferred viewer.
2. Review the compatibility section to ensure your existing PC and equipment are suitable for the installation. Make note of the necessary hardware and software configurations.
3. Check your current PC's Comm port settings using the port manager in the Control Panel, ensuring no conflicts with other devices.
4. Document your hardware setup. Make connections as instructed, ensuring each instrument is connected to the correct ports on the converter.
5. Install the converter software by loading the installation disk into your PC and following on-screen prompts for setup.
6. Utilize the Bootp program to assign the necessary IP address and verify all network configurations. Ensure you have the correct MAC address from the converter.
7. Capture all settings for Comm ports in the Control Panel, configuring them according to the guidelines provided for the GC and ALS setup.
8. After configuring the PC, move on to make changes in the HP ChemStation software, ensuring all devices are correctly identified and set up.
9. Edit the Win.ini file as specified to reflect the correct communication settings for each instrument you have configured.
10. Finally, save your changes and ensure that the system is fully operational by performing a test run. Make sure to keep the installation worksheet handy to log all relevant details.

Complete your installation guide online for a smooth and efficient setup process.