Get Micro Embedded Generator Connection Form - United Energy

Filling out the Micro Embedded Generator Connection Form is a crucial step for users looking to connect an inverter-based generator system. This guide provides clear, step-by-step instructions to ensure you complete the form accurately and efficiently.

Follow the steps to fill out the Micro Embedded Generator Connection Form.

1. Use the ‘Get Form’ button to access the Micro Embedded Generator Connection Form. Once obtained, open it for editing.
2. Begin by completing Section 1, which requires information about installation details. Indicate whether the installation is a new setup, an alteration, or an abolishment by ticking the appropriate box.
3. Fill out the installed capacity section, noting the capacities of any previously installed systems as applicable. Enter the separate inverter installation details by ticking the appropriate boxes for solar PV, wind, or other types.
4. Provide detailed information on the energy storage systems, including new capacity, previously installed, and removed capacities for batteries. Enter total installed capacities accurately.
5. Input the phase details if applicable. For multi-phase systems, enter the installed capacity per phase. Fill in the details for each inverter and energy storage system, including model names and ratings.
6. Complete the sections for certifying authority, certificate number, and confirm whether the operating manual was provided to the customer. Also indicate if the customer received instruction on operating the system.
7. Upon finishing Section 1, proceed to Section 2 and have a Registered Electrical Contractor sign to confirm compliance with all required regulations and standards.
8. In Section 3, provide the system owner's details including name, address, and contact information. The system owner must then acknowledge and accept the model standing offer by signing the form.
9. After completing all sections and gathering necessary signatures, review the form for accuracy. You can then choose to save changes, download a copy, print the form for your records, or share it with the relevant party.

Take the next step towards connecting your embedded generator system by completing the Micro Embedded Generator Connection Form online today.