Get Dunbrik Flues

A flue is a venting system, each system needs its own so If you heat your home with oil or gas and have a fireplace you would have two flues. Often times they are in one chimney so if you were to look down the chimney it would be separated into two venting system inside one chimney.

Flue tile should be at least 5/8-inch thick. It is available in several sizes. The most commonly used sizes in residential construction are 8 by 8 inches, 8 by 13, and 13 by 13 (outside dimensions). Flue tiles are connected together with cement mortar joints, struck smooth on the inside.

A log burner flue is available in a number of different materials – stainless steel, concrete, pumice, clay or ceramic and plastic. Concrete, pumice and clay or ceramic are collectively referred to as masonry chimneys.

Open wood burning and coal fires require a class 1 flue liner with a minimum diameter of 200mm. Open fires with larger fireplace openings (usually freestanding grates) will need larger flue sizes calculated alongside the height of the chimney and required ventilation.

The ideal flue size is typically determined by the exhaust outlet of the stove or appliance. The rule of thumb for sizing a chimney liner is that you never want it to be smaller than the appliance exhaust hole and you don't want the liner to be three times the area of the exhaust hole of the appliance.

Usually, flue pipes or tubes run vertically through a home to the outside. In some cases, flue pipes or tubes can run horizontally through a house to the outdoors. A chimney is a passage way for combustion byproducts to travel up that runs from a fireplace or stove up to the top of a house.

When a flue is too big, the chimney can be too cold. Cold chimneys make keeping a fire lit more difficult. They also lead to condensation and possible mold inside the chimney brickwork. They key to making and keeping a great draft in your fireplace is making sure the proper sized flue is installed.