Get Fg21803

The Fg21803 form is a crucial document for detailing the specifications and performance metrics of a 12V 18Ah battery. This guide provides comprehensive instructions on how to effectively fill out this form online, ensuring accurate and complete submissions.

Follow the steps to fill out the Fg21803 form online easily.

1. To begin, locate the ‘Get Form’ button to access the Fg21803 form. This will allow you to open the document in an online editor where you can input necessary details.
2. In the 'Nominal Voltage' section, enter the nominal voltage of the battery. Ensure that you use the correct voltage measurement.
3. Fill in the 'Dimensions (mm)' section by providing the length, width, and height of the battery accurately based on the specifications provided.
4. In the 'Approximate weight' field, indicate the weight of the battery as 0.59 kg. Ensure that this information is current and correct.
5. Complete the 'Energy Density' and 'Specific Energy' sections by entering the values of 66.39 Wh/l and 28.65 Wh/kg respectively.
6. Indicate the 'Maximum discharge current in 5 seconds', noted as 180 A in the specifications.
7. Document the 'Thermal compensation factor' for both floating and cyclic use, which should be -18mV/°C for floating and -30mV/°C for cyclic.
8. In the 'Terminals' section, specify the terminal type, which is a flat lug type of 4.8 mm.
9. You will find a section regarding 'Vibration Test'. Record the relevant details based on your testing conditions on cycles, excursion, and duration.
10. Fill in the 'Shelf life' percentage values that correspond to the time frames indicated: 97% for 1 month, 91% for 3 months, and 83% for 6 months.
11. Under 'Case material', enter 'Acrylonitrile-Butadiene-Styrene' as specified. Note any additional information needed in the blanks available.

Complete your Fg21803 form online accurately today!