Get Emergency Lighting Test Record 2010rtf - Mendhamfireprevention

This guide provides clear instructions on how to effectively complete the EMERGENCY LIGHTING TEST RECORD 2010rtf - Mendhamfireprevention online. By following these steps, users will ensure all emergency lighting equipment meets the necessary testing requirements.

Follow the steps to complete your emergency lighting test record.

1. Click ‘Get Form’ button to obtain the form and open it in the online editor.
2. Begin by filling out the 'Emergency Light Unit #' field with the identification number of the emergency lighting unit being tested.
3. Enter the current date in the 'DATE' field to document when the test is being conducted.
4. Indicate the type of unit you are testing by filling in the 'Exit Sign Unit #' field if applicable.
5. In the 'TEST DURATION' section, check the appropriate box to specify if the test duration is for 30 seconds (Monthly) or 60 minutes (Yearly).
6. Record the results of the test by indicating 'OK' or 'NOT OK' in the 'TEST RESULTS' field. If the result is 'NOT OK', provide a brief description of the failure.
7. In the 'CORRECTIVE ACTION TAKEN' field, describe any corrective actions that were implemented, such as 'replaced lamp or battery'.
8. Finally, ensure that the inspection is documented by filling out the 'Inspected By' field with the name of the person conducting the inspection and adding the date of the inspection.
9. After completing the form, users can save changes, download the document, print it, or share it as needed.

Complete your emergency lighting test records online to ensure compliance and safety.