Get Cwhs Instructions To Fit Visual_layout 1 - Centurion Safety Products

This guide provides a comprehensive overview of how to accurately fill out the CWHS Instructions To Fit Visual_Layout 1 for Centurion Safety Products. By following these steps, users can ensure that the installation process of the Cold Weather Hood System is straightforward and effective.

Follow the steps to successfully complete the form.

1. Click the ‘Get Form’ button to obtain the form and open it in the designated editor.
2. Begin by separating the top of the fleece liner from the bottom and sides by releasing the Velcro tabs.
3. While holding the top section with the Centurion logo facing outwards and positioned at the back of the helmet, insert this top section into the helmet. Ensure it fits between the back two cradle straps and the helmet shell, while placing the bottom/sides around the outside of the headband.
4. Attach the four Velcro tabs located on each side of the central cradle strap (two on each side) to securely connect the top and bottom parts of the liner. For a tidy appearance, tuck the liner behind the four headband retainer tabs, ensuring the headband remains adjustable.
5. If a Frost Cape is required, zip the Cape to the Liner.
6. For helmets other than the Reflex model, first remove the Cradle Headband Assembly by carefully pushing the six white kit brackets out of the shell.
7. Feed the kit brackets through the six spaces between the Velcro tabs on the fleece liner, ensuring the appropriate positioning for both front and rear brackets.
8. After inserting the six kit brackets, reinsert the entire assembly into the helmet shell by positioning the brackets above the corresponding holes and pushing them firmly into place.
9. If necessary, zip the Frost Cape to the Liner.
10. Once all steps are completed, review your work. Users can then save changes, download, print, or share the form as required.

Complete your document online today and ensure the safe and proper fitting of the Cold Weather Hood System.