Get 22144 Paintable Rubberized Undercoat - Pro Form

Filling out the 22144 paintable rubberized undercoat - pro form online can streamline your application process for using this product effectively. This guide provides clear, step-by-step instructions to ensure you complete the form accurately and efficiently.

Follow the steps to successfully complete the form online.

1. Click the ‘Get Form’ button to access the document and open it for editing.
2. Begin by ensuring that you have the proper surface preparation as outlined. This includes lightly sanding to enhance bond.
3. In the form, indicate your choice of cleaning method. For general surfaces, select water and soap, while for cured paint surfaces, choose the 13524 wax and grease remover. If applicable, select the 19040 plastic parts cleaner for plastic surfaces.
4. Confirm the shaking of the product before use. This can be a checkbox or text entry indicating 'shaken thoroughly' within the form.
5. Include details about using a siphon gun to apply the undercoat. Specify the correct air pressure and distance, adjusting based on the factory texture.
6. Document the expected drying time in your form. Indicate that under normal conditions, 1-1/2 to 2 hours drying time is necessary, emphasizing that full curing is required before top coating.
7. When detailing the application process for top coating, include a note on applying a thin first coat and allowing a 5-minute flash time before proceeding to a full wet coat.
8. Ensure that there’s a section for noting caution, including the importance of testing compatibility with the paint system and advising against use below 60°F (16°C).

Complete your documents online today for a smooth and efficient product preparation experience.