Get Lab6 Addition Of Generation Ee461 Power Systems - Projects-web Engr Colostate

This guide provides a comprehensive overview on how to successfully fill out the LAB6 ADDITION OF GENERATION form for EE461 Power Systems at Colorado State University. By following each step carefully, users can complete the form efficiently and accurately.

Follow the steps to fill out the form correctly.

1. Click the ‘Get Form’ button to obtain the form and open it in your preferred editor.
2. Begin the lab by introducing a wind farm into the specified base case. Load the required sample.sav file for analysis, ensuring you understand the earlier labs' context for effective completion.
3. Load the sample.sld slider file and save it as sample1.sld to prevent any corruption of the original. Similarly, save the sample.sav as sample1.sav.
4. Identify bus 154, representing a central bus at a 230 kV rating. Adjust branches and other buses for clearer visualization.
5. To add a new bus, select the branch between buses 153 and 154, right-click on it, and choose 'Tap Line'. Specify 75% for bus location and assign a bus number above 90000.
6. After adding the bus, solve the case to update the values. Subsequently, add another bus by utilizing the 'Sizable Busbar' tool.
7. Double-click on the newly added bus to rename it to CSU_LOW and set the base kV to 34.5.
8. To introduce a transformer, select the 2-Winding Transformer button and click between the newly created CSU and CSU_LOW buses.
9. Access the transformer tab in the data file to update the transformer rating from 0.0 to 25.0 MVA.
10. Run the automation file by selecting the required IPLAN file and inputting relevant parameters for turbine models.
11. Follow through with the windows that prompt for model selection and dispatch parameters until the system incorporates the wind generation into the data file.
12. Finally, save your changes, download the filled form, and ensure you print or share the document as needed.

Complete your documents online to ensure a seamless submission.