Get Eccllq444sds

The Eccllq444sds is a specialized form designed for ordering multi-beam column caps. This guide provides a clear and comprehensive overview of how to fill out the form correctly to ensure that your order is processed smoothly.

Follow the steps to complete the Eccllq444sds form successfully.

1. Click the ‘Get Form’ button to access the Eccllq444sds form and open it in your browser or editor of choice.
2. Choose the column cap style based on the configuration required for your project. If you are unsure which style to select, refer to your project plans for clarity.
3. Fill in the dimensions of the column cap in the designated fields. It is essential to provide actual inches rather than nominal dimensions.
4. In the ‘Post and Beam Dimensions’ section, input the measurements of the beams and posts. Ensure you use actual inches.
5. Determine the beam orientation by checking your plans or the selected column cap configuration. Mark the corresponding box that matches your beam setup.
6. Indicate the required style and strap orientation by checking the appropriate box provided on the form.
7. Select the finish for the column caps. The standard option is Simpson Strong-Tie® gray paint, but you can specify an option if necessary.
8. Finally, follow the provided instructions to place your order by contacting Simpson Strong-Tie for further information on procurement, or complete any additional steps as may be required.

Complete your Eccllq444sds form online to ensure your order is processed correctly.