Get B Form Fp 10 - Dry Pipe Valve Tests

Filling out the B Form FP 10 - Dry Pipe Valve Tests online can facilitate the documentation of dry pipe valve testing for fire safety compliance. This guide will provide you with clear, step-by-step instructions to ensure you complete the form accurately and efficiently.

Follow the steps to complete the B Form FP 10 - Dry Pipe Valve Tests.

1. Press the ‘Get Form’ button to retrieve the B Form FP 10 and open it in your preferred online editor.
2. Fill in the 'Date' field to indicate when the dry pipe valve tests were conducted.
3. Enter the 'Premises' location where the tests took place.
4. Specify the 'Boro' (borough) in which the premises are located.
5. Indicate the 'Height' of the building in feet.
6. Fill in the number of 'Stories' in the building.
7. Provide details on the 'Standpipe' system, noting any relevant classifications.
8. List the 'Operator Licensed' relevant to the system in use.
9. Document the 'Classification' and 'Feet Area' of the building.
10. Complete the 'Construction' section by providing relevant details about the materials used.
11. For 'Dry Valve #1', fill in the size, make, and model of the dry valve and record the pressures before the test (in lbs) for both air and water.
12. Document how the dry valve operated at air pressure and the time taken for water to reach the inspector's test valve (in minutes and seconds).
13. Indicate whether the operation was satisfactory and that the dry valve was properly reset.
14. Note if the alarms operated during the test along with the time taken (in minutes and seconds).
15. Repeat steps 11 to 14 for 'Dry Valve #2'.
16. Under the 'Quick Opening Devices' section, provide similar details regarding the size, make, and model, as well as all pressure, operation, and timing information.
17. Complete the 'Inspection' section including print and signature of the inspector.
18. Finally, submit the report to the Division of Fire Prevention, Fire Department as indicated at the bottom of the form.
19. After ensuring all fields are correctly filled, you can save changes, download, print, or share the completed form as needed.

Start filling out the B Form FP 10 - Dry Pipe Valve Tests online today.